Types of safety clothes – quần áo bảo hộ lao động for full body protection

1.a. Description (Type 1)

Fully encapsulating clothes

One-piece safety clothes. Boots and gloves – găng tay may be integral, attached and replaceable or separate.

1.b Type of protection – bao ho lao dong (Type 1)

Protects against splashes, dust gases, and vapors.

1.c Applications (Type 1)

Does not allow the body heat to escape. May contribute to heat in the wearer- bao ho lao dong, particularly if they are worn in combined with a closed-circuit SCBA; a cooling safety uniform –  quan ao bao ho lao dong may be needed. To reduce the worker mobility, vision, and communication.

2.a. Description (Type 2)

Non-encapsulating clothes –bao ho lao dong

Jacket – Quần áo bảo hộ lao động, hood, pants or bib overalls, and one-piece coveralls.

2.b Type of protection – bao ho lao dong (Type 2)

Protects against splashes, dust, and other materials but not against gases and vapors. Does not protect parts of head or neck.

2.c Applications (Type 2)

Do not use where lots of gases or popular splashing protection is required. May contribute to heat  in wearer –bảo hộ lao động. Tape-seal connections between pant cuffs and boots, between gloves and sleeves.

3.a. Description (Type 3)

Aprons, legs, and sleeve protectors

Fully sleeved and gloved apron. Separate coverings for arms and legs. Commonly worn over nonencapsulating suit-  quan ao bao ho lao dong

3.b Type of protection (Type 3)

Provides additional splash protection of chest, forearms, and legs.

3.c Applications (Type 3)

Whenever possible, should be used over a non-encapsulating suit –bao ho lao dong to minimize potential heat. Useful for sampling, labeling, and analysis operations. Should be used only when there is a low probability of total body contact with contaminants

4.a. Description (Type 4)

Firefighters’ safety clothes

Gloves –Găng tay, helmet –mũ bảo hộ, running or bunker coat,pants and boots

4.b Type of protection – bao ho lao dong (Type 4)

Protects against heat, hot water, and some particles. Does not protect against gases and vapors, or chemical permeation or degradation. A safety clothe consists of an outer shell, an inner liner and a vapor barrier with a minimum water penetration of 25 lb/in2 (1.8 kg/cm2) to prevent passage of hot water.

4.c Applications (Type 4)

Decontamination is difficult. Should not be worn in areas where protection against gases, vapors, chemical splashes or permeation is required.

5.a. Description (Type 5)

Proximity clothes –Quan ao bao ho lao dong

One- or two-piece over -clothes with boot covers, gloves, and hood of aluminized nylon or cotton fabric. Normally worn over other protective clothing, firefighters’ bunker gear, or flame-retardant coveralls.

5.b Type of protection (Type 5)

Protects against splashes, dust, gases, and vapors.

5.c Applications (Type 5)

Does not allow body heat to escape. May contribute to heat stress in wearer, particularly if worn in conjunction with a closed-circuit SCBA; a cooling garment may be needed. To reduce the worker mobility, vision, and communication.

6.a. Description (Type 6)

  • Blast and fragmentation clothes
  • Blast and fragmentation vests and clothing, bomb blankets, and bomb carriers.

6.b Type of protection (Type 6)

Provides some protection against very small detonations. Bomb blankets and baskets can help redirect a blast.

6.c Applications (Type 6)

Does not provide for hearing protection

7.a. Description (Type 7)

Radiation-contamination protective clothes. Various types of protective clothes designed to prevent contamination of the body by radioactive particles.

7.b Type of protection (Type 7)

Protects against alpha and beta particles. Does not protect against gamma radiation.

7.c Applications (Type 7)

Designed to prevent skin contamination. If radiation is detected on site, consult an experienced radiation expert and evacuate personnel until the radiation hazard has been evaluated.

8.a. Description (Type 8)

Flame/fire retardant coveralls

Normally worn as an undergarment.

8.b Type of protection (Type 8)

Provides protection from flash fires.

8.c Applications (Type 8)

Exacerbate heat problems and impair mobility.

Nam Nhan Phat Co., LTD  is the  trusted supplier to provide safety items bảo hộ lao động, sewing safety clothes may quân áo bảo hộ lao động, sewing safety uniforms- may đồng phục bảo hộ lao động, uniforms-may dong phuc, tools, clean room clothes.

To contact with us for supporting. (View more)

Nam Nhan Phat Co.LTD

Tel: 08 2253 1169

Hotline: 0938073502

Gmail: namnhanphat@gmail.com

Related articles:

Why do we need to equip the safety clothes

Vì sao cần trang bị quần áo bảo hộ lao động

Bảo hộ lao động những vấn đề cần xem xét

Đồng phục bảo hộ trong môi trường hóa chất (Phần I)

Đồng phục bảo hộ lao động trong môi trường hóa chất (Phần II)

Đồng phục bảo hộ lao động trong môi trường hóa chất phần III

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s